HARDI ISO F-80 Flat Fan Nozzles

This nozzle has an 80° spray angle. On Boom sizes from 80 ft to 132 ft the boom height is often higher than 20″ above the target. 80° nozzles provide good coverage with reduced drift risk at these higher boom heights and are also adaptable to band spraying.

Features:

  • ISO – flow, color, and outer dimensions
  • Spray angle – 80°
  • Working pressure – 20 to 70 PSI
  • SYNTAL – precision-molded thermoplastic

The 80° nozzle is suitable for big booms or row crop/band spraying with either low boom or nozzles at droplegs.

For use in cotton, sugar cane, sugar beets, etc…

The 80° nozzles can be fitted on HARDI sprayers using the 334083 ISO/INJET cap.

Showing all 4 results

ISO F-01-80 ORANGE NOZZLE TIP, SYNTAL-S

$6.98
HARDI ISO F-01-80 Orange Nozzle Tip Only, Syntal-S Use SNAP-FIT holder # 334083 (Not Included) HARDI F-80 SPECS

ISO F-015-80 GREEN NOZZLE TIP, SYNTAL-S

$6.98
HARDI ISO F-015-80 Green Nozzle Tip Only, Syntal-S Use SNAP-FIT holder # 334083 (Not Included) HARDI F-80 SPECS

ISO F-03-80 BLUE NOZZLE TIP, SYNTAL-S

$6.98
HARDI ISO F-03-80 Blue Nozzle Tip Only, Syntal-S Use SNAP-FIT holder # 334083 (Not Included) HARDI F-80 SPECS

ISO F-02-80 YELLOW NOZZLE TIP, SYNTAL-S

$6.98
HARDI ISO F-02-80 Yellow Nozzle Tip Only, Syntal-S Use SNAP-FIT holder # 334083 (Not Included) HARDI F-80 SPECS